KBP Series Manual 67
NOTE
When the controller with priority is locked, all remote
controllers will also be locked. Any controller in this
case can be used to release the “Lock” funcon. When
all the remote controllers are “OFF”, any remote con-
troller can be used to “Lock” all remote controllers.
1.Press “LOCK” buon for 3 seconds unl “LOCK” icon
appears and controller beeps (unless beep has
been deacvated). Once locked the “LOCK” icon
will be displayed.
“LOCK”
Icon
2. Press “LOCK” buon again for 3 seconds unl
“LOCK” icon appears and controller beeps (unless
beep has been deacvated). The controller is now
unlocked and the “LOCK” icon is no longer displayed.
PRIORITY Icon
Hot Water
Temperature
Hot Water
Temperature
Lock Funcon
The “Lock” funcon will prevent the buons on the
controller from working a safeguard against small
children or otherwise inappropriate operaon.
The “Lock” funcon can be used whether the
controller is “ON” or “OFF”.
When the “Lock” funcon is acve, all other
buons are locked out except for the “LOCK”
buon.
Seng Priority
The “PRIORITY” buon is only used when there is more
than one temperature controller connected to a tank-
less water heater. Only the controller with the
“PRIORITY” icon will have the ability to change the tem-
perature so as to avoid scalding or other injury (please
note that if only 1 controller is installed, the “PRIORITY”
buon will remain lit.)
Press “PRIORITY” buon
-“Priority” icon will be displayed on the controller
allowing the hot water temperature to be
changed.
*When the controller is being powered “ON” the
controller is priorized and the “priority” display
is shown.
*When priority is selected, the set temperature of
the priorized controller becomes the set
temperature of the tankless water heater.
-Regardless of which controller has priority, all
sengs or funcons other than temperature can
be adjusted and used.
Hot Water
Temperature
Priority Icon
CIRCULATION
Icon
Comments to this Manuals