Rinnai SUNMASTER Installation Manual download pdf (Page 6)

Rinnai Australia 4 Solar Split Systems Operating / Installation Manual

IMPORTANT INFORMATION & WARNINGS

OPERATION PRINCIPLE

This system is designed to have the solar collectors on the roof and the storage cylinder installed at ground or floor

level.Electric and Gas boosted models are available. The system comprises a hot water storage cylinder, solar

collectors, pump circulation system solar control unit and temperature sensors. The solar control unit ensures

water circulates between the solar collectors and the storage cylinder to transfer heat from the solar collectors to

the water in the cylinder if enough heat is available from the sun.

Supplementary heating is provided if insufficient heat is available from sun (such as during cloudy or rainy weather

or during winter months) either via an electric heating element(s) located inside the storage cylinder or via a on in-

line Gas booster located external to the storage cylinder. The following diagrams illustrates the Split Solar Hot

Water System set up for both the Electric and Gas boost..

Figure 1. Sunmaster Gas Boosted Hot Water Systems Figure 2. Sunmaster Electric Hot Water Systems

Figure 3. Prestige Electric Hot Water Systems

PUMP & SOLAR

CONTROL MODULE

COLD WATER

SUPPLY

TO HOT WATER

OUTLETS

GAS SUPPLY

TO HOT WATER

OUTLETS

PUMP & SOLAR

CONTROL MODULE

COLD WATER

SUPPLY

ELECTRIC ELEMENT

PUMP & SOLAR

CONTROL MODULE

ELECTRIC ELEMENT

COLD WATER

SUPPLY

TO HOT WATER

OUTLETS

1 2 3 4 5 6 7 8 9 10 11 ... 63 64

No comments

Rinnai SUNMASTER Installation Manual Page 6