Rinnai SUNMASTER Installation Manual download pdf (Page 25)

Rinnai Australia - 23 - Solar Split Systems Operating / Installation Manual

STANDARD INSTALLATION CONTINUED

Fastening (Collectors to a Metal Roof)

This installation is not suitable for in cyclonic areas. For further details, please

contact your local Rinnai Solar distributor.

• Position the lower collector mounting rail

assembly so that the rail is angled to ensure

the collectors have an 8 mm / collector rise.

• For aesthetic reasons it is best to mount as

close as possible to the gutter.

• Attach the collector mounting straps to the

rafter or truss under the tiles as shown in

Figure 15.

Figure 15 - Mount Lower Collector Rail

• Place the collector(s) onto the roof above the

lower rail. If more than one collector is being

installed then join them together using the

compression fittings supplied.

• Push down on the collector retainers to clamp

the collector and tighten the nuts as shown in 

Figure 16.

Figure 16 - Mount collector on Roof

• Position the upper collector rail above the

collectors. Push down on the retainers to

clamp the collector and tighten the nuts.

• Attach the collector mounting straps to the

rafter or truss under the tiles as shown in

Figure 17.

Figure 17 - Attach Mounting Straps

• Replace the tiles and ensure the collector is

secure as shown in Figure 18.

Figure 18 - Replace Tiles

NOTE

Nail strap to rafter

Tiles removed

Nail strap

to rafter

Tiles removed

INSTALLATION OF SOLAR COLLECTORS

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 63 64

No comments

Rinnai SUNMASTER Installation Manual Page 25