Rinnai 2402 Specifications download pdf (Page 18)

Model 2402www.rinnaiamerica.com 1 8

FOR YOUR SAFETY READ BEFORE OPERATING

CARE & LIME CONDITION WARNING

7) Turn the manual valve located at the gas

inlet of appliance counterclockwise

to “ON”.

8) Turn on all electric power to the appliance.

9) Set thermostat to desired setting.

10) If the appliance will not operate,

Follow the instructions “To Turn Off

Gas To Appliance” and call your

service technician or gas supplier.

To Turn Off Gas To Appliance

1) Set the thermostat to lowest setting.

2) Turn off all electric power to the appliance if service is to be performed.

3) Turn the manual valve at gas inlet of appliance clockwise to “OFF”

Care of Unit’s Exterior:

Keep the exterior cabinet clean. Use a soft cloth and warm water when cleaning the cabinet.

Do Not use volatile substances such as benzene and thinners, as they may ignite, or cause

fading of the paint.

Lime Condition Warning Signal:

If you notice “LC” flashing on the remote key pad, this means the unit is beginning to lime up,

and MUST be flushed. Contact a qualified Rinnai service technician to flush the appliance.

Failure to flush the appliance when “LC” is flashing, will cause damage to the heat exchanger.

Damage caused by lime build up is not covered by the unit’s warranty.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

No comments

Rinnai 2402 Specifications Page 18