Rinnai 2402 Specifications download pdf (Page 33)

Model 2402 800-621-941933

INSTALLER’S INSTALLATION INSTRUCTIONS

Lighting the Unit

WARNING: If you do not follow these instructions exactly, a fire or

explosion may result causing property damage, personal injury or loss

of life.

1) This water heater does not have a pilot. It is equipped with a direct ignition

device which automatically lights the burner. DO NOT TRY TO LIGHT THE

BURNER BY HAND.

2) Before operating the Continuum 2402 smell all around the unit for gas. Be

sure to smell near the ground as leaking gas may settle there.

3) Turn the manual gas control valve on.

STOP!! READ THE SAFETY ISSUES ON PAGES 8 & 9

4) Turn on any hot water tap. The Continuum 2402 should light and begin

heating your water.

If the Continuum 2402 fails to light

1) DO NOT ATTEMPT TO LIGHT BY HAND.

2) Turn off the electrical power to the unit.

3) Turn off the manual gas control.

4) Wait 5 minutes, if you smell gas, go to a neighbor's house and call the gas

company or the fire department. If you do not smell gas, go to the next step.

5) Turn the manual gas control valve on.

6) Turn the electrical power to the unit on.

7) Turn on any hot water tap.

8) If the unit still fails to light, turn off the electricity and gas to the unit and call

Rinnai 1-800-621-9419.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

No comments

Rinnai 2402 Specifications Page 33