Rinnai 2402 Specifications download pdf (Page 15)

Model 2402 800-621-941915

MAINTENANCE SUGGESTIONS

This water heater has been designed and constructed

for a long performance life when installed and operated

properly under normal conditions. Regular inspections,

as outlined in this section, are strongly recommended

as a means of keeping your heater operating efficiently.

1. Cleaning

The water heater must be cleaned annually.

Keep the water heater clear of dust and debris

especially in and around burner.

Cleaning procedures for the Continuum are as

follows:

1) Turn off and disconnect electrical power. Allow

to cool for one hour.

2) Remove the Front Panel by removing screws.

See parts breakdown on panels.

3) Use pressurized air to remove dust from around

main burner.

4) Use soft dry cloth to wipe cabinet.

DO NOT DAMAGE OR DISTORT ANY

PARTS OF HEATER.

DO NOT USE WET CLOTH OR

SPRAY CLEANERS ON BURNER.

2. Visual check of main burner flames.

The burner must flame evenly over the entire

surface when operating correctly. The flame must

burn with a clear, blue, stable flame. See the parts

breakdown of the burner for the location of view

ports. Any and all parts removed for inspection or

service must be replaced before operating the unit.

The flame pattern should be as shown in the

following Figures.

* VENT MAINTENANCE

* VENT SYSTEM

Must be checked annually for

blockage or deterioration. See

vent installation instructions.

* MAINTENANCE-

ELECTRIC MOTORS

Motors are permanently

lubricated and need no

lubrication. Keep fan and

motor free of dust and dirt,

clean annually.

MAINTENANCE & SERVICE INFORMATION

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Comments to this Manuals

No comments

Rinnai 2402 Specifications Page 15

Comments to this Manuals

Related products and manuals for Water heaters & boilers Rinnai 2402