Rinnai RHFE-1001FA Installation Manual download pdf (Page 24)

– 22 –

■ INSTRUCT CUSTOMER ON USE OF HEATER

When you are satisfied that the appliance is

operating correctly, explain operation of heater to

the customer.

Fault-Failure Procedure

If unable to get the heater to operate correctly,

contact Rinnai directly or your Agent or Gas Utility.

Do not use electrical extension cords to connect unit

to power supply. Keep the power cord away from

the flue.

Some items are not covered under the unit’s

warranty. Example: annual maintenance, carbon on

flame rods/igniter, dust, spider webs, improper

conversions, etc.

9. If necessary, the unit can be levelled using the

adjustable legs under the front right and left hand

side legs.

6. Slide the insulation sleeve up to the flue

manifold,slip the securing clip over the sleeve as

shown.

8. Fix Back Spacer, Top to heater.

(3 screws in top back cover).

7. Fit Wall bracket as shown below.

Up to

3/8"(10mm)

Adjustable Leg

SCREW

（M5）

SCREW

（M5）

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 59 60

No comments

Rinnai RHFE-1001FA Installation Manual Page 24