Rinnai RHFE-1001FA Installation Manual download pdf (Page 19)

– 17 –

LOCATION / CLEARANCES

When positioning the heater the main points

governing the location are:

1. Flueing

2. Warm air distribution

This heater is not designed to be built in.

The flue terminal should be positioned away from

flammable materials.

Do not flue into natural draught flues or fireplaces,

this unit can only be used with one of the five types

of Rinnai flue kits. Do not flue unit into other rooms.

Flue terminal must be outside.

Flue may be positioned directly under opening

windows, with a minimum clearance of 9

" (230mm).

FLUE SIZES:

5 Flue lengths are available.

S flue walls 3

" 4 1/2" (75 115mm)

A flue walls 4 1/2" 9 1/2" (115 240mm)

B flue walls 9 1/2" 15 3/4" (240 400mm)

C flue walls 15 3/4" 23 5/8" (400 600mm)

D flue walls 23 5/8" 31 1/2" (600 800mm)

The flue is not designed to be positioned under

floors, or below the level of the heater.

Flue Terminal

LP GAS

Flue

Terminal

Flue

Terminal

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 59 60

No comments

Rinnai RHFE-1001FA Installation Manual Page 19