Rinnai RHFE-1001FA Installation Manual download pdf (Page 16)

INSTALLATION INSTRUCTIONS

– 14 –

Check to ensure gas type on rating plate matches gas being supplied to the unit. If not, unit may have

been converted and should be checked to ensure conversion was done properly. If not, unit could be

damaged due to being overfired.

Refer to local gas authority for confirmation of gas type if in doubt.

Refer to data plate located inside of the front panel.

Check for damage, if the unit is damaged contact your supplier or Rinnai.

Do not install a damaged unit before checking with your supplier.

Refer to an approved pipe sizing chart if in doubt about size of gas line.

Flue Manifold .......................1

Spare rubber seal

...........................1

(‘A’ Flue units only)

(For weatherboard installations)

Back Spacer

Set

Air inlet hose

Vent adaptor

Pipe stopper

A&S

Pipe stopper

Wall

Brackets

Insulation

Clip

Plastic tie for

air inlet

(M4)

(M4×20)

(M4)

(M4.8×32)

Wood Screws

Owner’s Manual

Conversion Manual

Template

For Flue Lock Stopper

For Flue Manifold

Wall Bracket Screws

For Back Spacer Set

4(M5)

For Wall Brackets

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

No comments

Rinnai RHFE-1001FA Installation Manual Page 16