Rinnai EX11C Installation Manual download pdf (Page 26)

26 Rinnai Corporation EX08C, EX11C Manual

Pipe stopper

Elbow

Manifold

Hook

Pipe stopper

Connecting the Appliance

1. Attach the air inlet hose to the flue manifold on

either inlet position “a” or “b”.

The plastic tie should be tight over the sleeve.

The unused inlet is plugged with the rubber cap

supplied on the manifold.

2. Connect the flue elbow to the manifold while

moving the appliance into position.

3. Fit the pipe stopper over the connection between

the flue elbow and the manifold. Engage the

hook and rotate it until it snaps against the body

of the clamp.

4. Slide the insulation sleeve up to the flue manifold

and slip the securing clip over the sleeve as

shown.

5. Install the bracket on the rear of the top spacer by

tightening 2 screws.

6. Install the wall bracket with two screws. Install

the top spacer by clipping the spacer into the wall

brackets and attaching it to the heater with 2

screws.

Flue Manifold

Fit Clip

Slide

Sock

Wall

Bracket

Top Spacer

2 screws

Spacer

Bracket

Wall

Bracket

Top Spacer

Spacer

Bracket

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 79 80

No comments

Rinnai EX11C Installation Manual Page 26