Rinnai Symmetry RDV3611 Installation Manual download pdf (Page 12)

12 | RDV3611 Operation Guide: 11158-B 02-13

Programming your controller

The clock must be set before the programmed timers will operate. Each day of the week

can be programmed for four periods, making a total of 28 programmed periods.

Setting the clock

1. With the controller (heater)

oﬀ, press T for two seconds.

2. Using the UP and DOWN

buttons adjust to the correct

time. Ensure you have the

correct time of the day (AM/

PM). Press OK to accept.

3. Repeat process to adjust the

minutes and day of the week.

Week settings available

MO > TU > WE > TH > FR >

MO TU WE TH FR > SA > SU >

SA SU > MO TU WE TH FR SA SU

A weekday program can be set

so the program is used Monday

to Friday. Similarly, a weekend

program can be set for Saturday to

Sunday.

If you do nothing to change

the programming the default

settings would be available if you

set it to automatic mode. When

in this setting, the heater will

automatically turn itself on and oﬀ

depending on the temperatures

set (similar to an air conditioning

unit).

For example:

If the room temperature at 1 am

falls below 15 °C, the heater will

turn on and stay on until the room

temperature increases above 15°C.

DEFAULT SETTINGS

Time

period

Start time Temp. °C

Period 1 6.00 am 20 °C

Period 2 8:30 am 15 °C

Period 3 5:00 pm 21 °C

Period 4 10:30 pm 15 °C

If you would like to stop the heater

from coming on at all, for example,

during the night and before period

1, you can reduce the temperature

setting using the DOWN button

until –– °C is reached. This means

no set temperature has been

programmed, and your heater

will stay oﬀ until the next period

setting.

For example:

Time

period

Start time Temp. °C

Period 1 5.30 am 20 °C

Period 2 8.00 am 15 °C

Period 3 5.30 pm 20 °C

Period 4 11:30 pm - - °C

To revert back to the default

settings, press the following

sequence of buttons:

P > T > T > DOWN

To begin programming

With the controller oﬀ, press and

hold the ‘P’ button for two seconds

to initiate programming. The LCD

will display ‘PROG’, ‘Pd’ and the

time at which the controller is

currently set will ﬂash. Period 1 can

now be set.

Setting the day of the week

1. Press and release the ‘UP’ or

‘DOWN’ button to change

the day of the week. Scrolling

order is as follows:

MO > TU > WE > TH > FR

> SA > SU > SA SU > MO

TU WE TH FR SA SU

2. To accept the selected day(s)

of the week press OK.

Setting the period starting time

1. After setting the day the AM/

PM settings will ﬂash. To set

the P1 starting time, press and

release the ‘UP’ or ‘DOWN’

button for the hour setting.

Ensure that the AM/PM is set

correctly.

2. To accept press OK. The

minute setting will now ﬂash as

in step 1—press OK to accept.

Setting the temperature

1. After setting the time period

the temperature will ﬂash.

Press and release the ‘UP’

or ‘DOWN’ button for two

seconds to adjust.

2. To accept press ‘OK’. Period

one is now set for the day(s)

of the week you have chosen.

The LCD will display P2 to

indicate period 2, which can

now be set for the same day(s)

of the week.

3. Repeat programming process

for remaining periods.

If you want to check what has

been programmed, press P

for two seconds and select OK

continuously to cycle through the

settings for each period.

A/M PWRT P

DOWN

UP

OK

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments