search

Rinnai Elevate Installation Manual Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 24
Rinnai Australia - 22 - Rinnai Luminaire® Outdoor Gas Fire - Operation and Installation Manual
Prepare surround
• Construct surround ensuring clearances to combustibles and minimum height from ground
clearance above. This needs to be a permanent and fixed construction.
• Remember to allow for a gas connection opening below the burner, refer page 20 for gas
connection positioning.
Install burner assembly
• Install burner assembly and fix in place with appropriate fasteners.
Install burner material and complete gas connection
• This is common to all installations as below.
Installation of the burner material is critical to correct operation of the Rinnai
Luminaire Outdoor Gas Fire.
Please note in each step the height at which the pumice, quartz stones or pebbles
should sit.
Layer 1 - Pumice
Fill the burner tray with pumice and level to the bottom
of the granite trims. Not all the pumice will be needed
as more has been supplied than necessary. Keep
remainder for top up next season.
Avoid pouring over the burner, dust particles can clog
the burner ports.
Ensure burner is not deeply buried by the pumice.
Layer 2 - Quartz Stones
Using all the small quartz stones provided, place a
single layer of small quartz stones evenly
covering the entire top of the pumice.
Layer 3 - Quartz Pebbles
Place the 14 pieces of large quartz pebbles on top of
the small quartz stones.
DO NOT COVER PILOT FLAME
HOUSING. Refer page 8.
DO NOT STACK THE PEBBLES.
The pebbles may roll off and cause personal injury or
damage to surrounding surfaces.
300mm
1m
1m
1m
E = 900mm Min.
600mm
Max.
1280mm Max.
100mm
300mm
100mm
WARNING
Granite trim
Burner
1st Pumice
Cross section
detail
Granite trim
Burner
1st Pumice
Cross section
detail
2nd Quartz Stones
WARNING
Granite trim
Burner
1st Pumice
Cross section
detail
2nd Quartz Stones
3rd Quartz Pebbles
FREESTANDING UNIT
BURNER MATERIAL
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments
Related products and manuals for Fireplaces Rinnai Elevate
Fireplaces Rinnai Symmetry RDV3610 Operations Instructions   (24 pages)
Fireplaces Rinnai ES17 Installation Manual   (44 pages)
Fireplaces Rinnai Neo RIB2310N Installation Manual   (28 pages)
Fireplaces Rinnai Arriva 752 Installation Guide   (20 pages)
Fireplaces Rinnai Symmetry RDV3610 Operations Instructions   (12 pages)
Fireplaces Rinnai RHFE-950ETR Installation Manual   (32 pages)
Fireplaces Rinnai Arriva 752 Operations Instructions   (20 pages)
Fireplaces Rinnai RIBF2L Installation Manual   (36 pages)
Fireplaces Rinnai Elevate Installation Manual   (56 pages)
Fireplaces Rinnai Elevate User Manual   (20 pages)
Fireplaces Rinnai Symmetry RDV3611 Installation Manual   (40 pages)
Fireplaces Rinnai FLAME FIRES Installation Manual   (31 pages)
Fireplaces Rinnai Amplify Installation Manual   (32 pages)
Fireplaces Rinnai RF1800 Installation Manual   (8 pages)
Fireplaces Rinnai Amplify Installation Guide   (36 pages)
Fireplaces Rinnai Amplify User Manual   (1 pages)
Fireplaces Rinnai Evolve 950 RHFE950ETRN User Manual   (60 pages)
Fireplaces Rinnai RHFE-201-RFA Installation Manual   (44 pages)
Fireplaces Rinnai Amplify Installation Manual   (29 pages)
  • NECRON ICIDU Traulsen CONVECTAIR Blue Line Innovations
  • Neumann.Berlin Unknown Avocent KVM switches GigaTent Unknown Jensen Radio receivers D-Link Bridge cameras
  • Samsung HW-J7501 Fellowes 220-2 Philips MC147/12 Whirlpool ADP 1077 WH
  • Carrier 23XL Specifications Nokia HS-16 User Manual Ridgid R2720 User Manual