Rinnai Elevate Installation Manual download pdf (Page 17)

Rinnai Australia - 14 - Rinnai Luminaire® Outdoor Gas Fire - Operation and Installation Manual



The Rinnai Luminaire Outdoor Gas Fire must be installed as a permanent fixture in an outdoor area.

Determining and consideration of the position for the Rinnai Luminaire Gas Outdoor Fire will be

dependent on the configuration of the unit purchased. Additional considerations such as protection

from direct rain, wind and sea spray, openable windows, debris from trees as well as location to

neighbouring properties also needs to be considered, gas supply and clearances from combustibles

will influence where you can position this appliance.



Location will also be depended on the type of unit purchased and if being installed into a combustible

cavity.

General Clearances

Inbuilt Freestanding

Minimum of 2 x 200 cm

ventilation slots to be incorporated into the structure.

One at the top of the storage area and one at the base.

Structure Clearances Required Additional Detail

Below eaves,

balconies or other

projections (A)

1000 mm minimum

If the projection is a shade cloth or material awning

then this is deemed as a combustible material and

the recommended clearance is 1500 mm.

From the ground or

other surface (E)

Inbuilt - 100 mm minimum 

Freestanding - 900 mm minimum

Ground level to bottom of fireplace.

Walls (D) 500 mm Side of unit to side wall.

Gas Meters 1000 mm

Drain of Soil Pipe 150 mm

Openable Windows

and doors

1000 mm

From an openable window, door or non mechanical

air inlet, or any other opening into a building with the

exception of sub-floor ventilation.

Mechanical Air Inlet 2000 mm For example: air conditioning unit.

Mantles (B) and (C) 500 mm / 300 mm

Minimum vertical clearance of 500 mm with a

maximum mantle depth of 300 mm. If mantle depth

is more than 300 mm you will need 1000 mm of

vertical clearance.

1 m safe distance

Fixed objects such as outdoor furniture, umbrellas and plants should be at least 1 m away

from the unit when it is in operation.

Installation specific

clearances

Additional clearances also need to be observed for specific installation applications, these

are detailed on the following pages.

Ensure clearing for

servicing

Ensure enough room is maintained for servicing, cleaning and general access to the

appliance.

Ventilation of structure

When using a 9 kg gas cylinder a minimum of 2 x 200 cm

ventilation slots must be used

(1 x top and 1 x bottom = 400 cm

total) to ensure safe ventilation of all structures housing

cylinders.

Mantel

Roof or Overhang

Additional structure or sidewall

E - min. 100mm

300mm

E = 900mm Min.

600mm

Max.

1280mm Max.

100mm

300mm

100mm

APPLIANCE LOCATION

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Comments to this Manuals

No comments

Rinnai Elevate Installation Manual Page 17

Comments to this Manuals

Related products and manuals for Fireplaces Rinnai Elevate