Rinnai GT4SB-S Specifications download pdf (Page 21)

www.rinnai.us

Model V2532W 21

This manual must be followed exactly.

1) Read the safety issues completely before installing the Continuum V2532W.

2) This water heater is suitable for residential water (potable) heating ONLY. DO

NOT use this water heater for space heating, combination space heating/

domestic water heating, or commercial water heating applications.

3) The Continuum V2532W is not suit

able for use in pool or spa applications.

4) Install the Continuum V2532W water heater outdoors only.

5) Maintain proper space around the unit for proper servicing and operation.

Minimum clearances from combustible materials are listed below.

Top of Heater 12 inches

Back of Heater 0 inch

Front of Heater 24 inches

Sides of Heater 6 inches

Ground 12 inches

Minimum clearances from non-combustible materials are listed below.

Top of Heater 2 inches

Back of Heater 0 inch

Front of Heater 0 inch

Sides of Heater 1/2 inch

Bottom 2 inches

DO NOT install the Continuum V2532W under an overhang less than 3 feet from

the top of the unit. When the overhang protrudes out over the V2532W greater

than 3 feet, the area under the overhang must be open on 3 sides.

When the V2532W water heater is inst

alled within a Rinnai RGB-25 recess box,

the clearances from the top, bottom, sides, and back sufaces of the recess box

to combustible materials are 0 inches. The clearance from combustibles from

the front of the recess box is 24 inches.

6) Installer must install a Pressure relief valve. Pipe pressure relief discharge to a

drain or outside environment (see page 29).

INSTALLER’S INSTALLATION INSTRUCTIONS

-Warnings-

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

No comments

Rinnai GT4SB-S Specifications Page 21