Rinnai Symmetry RDV3611 Installation Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
Rinnai Australia 6 Operation & Installation Manual
SAFETY
A dedicated 240V earthed 10 Amp power
point must be used with this appliance.
DO NOT use power boards or double
adaptors to operate this appliance. Heater
MUST NOT be located below a power
socket-outlet.
DO NOT place containers of liquid on top of
the heater. Water spillage can cause
extensive damage to the appliance and
create an electrocution hazard.
DO NOT place articles on or against this
appliance.
Turn the heater ‘OFF’ after use.
DO NOT unplug the heater while it is in
operation or while the fan is still cycling.
Heat emanating from the front of the
appliance may over time affect the
appearance of some materials used for
flooring such as carpet, vinyl, cork or timber.
This effect may be amplified if the air in the
room contains cooking vapours or cigarette
smoke. To avoid this possibility, it is
recommended that a mat be placed in front of
the appliance, extending at least 750 mm in
front of the heater.
When the heater is operated for the first time
or after long periods of non use a slight odour
may be emitted, this is normal. However if
odours persist switch ‘OFF’ the appliance and
contact Rinnai.
SAFETY DEVICES
Over Heat Switches
When the heater gets too hot during operation (for example when air outlet louvres are blocked)
these devices turn the gas off automatically and allow the heater to restart when cooled down.
Electrical Fuse
The electrical circuits are protected by a fuse.
Flame Failure Sensing System
This device automatically cuts off the gas supply to the heater in the event of a flame failure.
Power Failure
In the event of a power failure or power cut, the gas valves will automatically close. The remote
control/thermostat will restart the appliance at the next programmed time period.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Comments to this Manuals

No comments