Rinnai Elevate User Manual download pdf (Page 16)

Rinnai New Zealand

Steel Frame Console Installation Manual: 11316-C 03-09

Spacer Module Assembly

Assemble

spacer module

Measure and mark 2 positions on each spacer section so you can

determine where you need to predrill holes for securing them together.

A rough guide is approximately 180 mm up from the bottom and 100

mm down from the top

approx.

100 mm

approx.

180 mm

Pre-drill marked positions on rst frame.2.

Position pre-drilled section on side spacer and mark through hole of rst

section onto the second. Pre-drill holes in second section.

Using screws provided secure both pre-drilled spacer sections together.

Repeat steps 1-4 with remaining sides and then repeat process with

second spacer module.

1 2 ... 11 12 13 14 15 16 17 18 19 20

No comments

Rinnai Elevate User Manual Page 16