Rinnai Elevate User Manual download pdf (Page 10)

Rinnai New Zealand

Steel Frame Console Installation Manual: 11316-C 03-09

Base Module Assembly

Put together

base internal

spacers

Fit outer vertical studs (SN-1 and SN-5) into bottom plate (PB-1) and

secure.

Fit inner diagonal brace (BR-1) into second hole position of PB-1 and

secure.

Attach top plate (PT-1) and secure.

Repeat steps 1-3 to make up the second base internal spacer.

BR-1

PT-1

SN-1

SN-5

PB-1

Connect

base internal

spacers to

front and back

frames

Lay either the front or back frame on your working surface and place

one of the internal spacers on top. Ensure spacer and frame align (using

a clamp to hold sections together may make assembly easier).

Fix spacer to frame with 2 hex head screws top and bottom. Position

screws as far as possible to the outside of the stud. You need to keep

the drill as vertical as possible and apply pressure.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

Rinnai Elevate User Manual Page 10