Rinnai RCE-229A User Manual download pdf (Page 27)

ERROR MESSAGES

CODE DISPLAYED FAULT REMEDY

Tilt Switch Activated

Turn heater ON,

after setting heater upright.

Miss Ignition

Check gas is turned ON.

Service call if repeated.

Flame Failure

Ventilate the room.

Service call if repeated.

Back Fire Sensor Activated

Turn heater OFF, after a while ON

again. Service call if repeated.

Overheat

Clean filter.

Service call if repeated.

Room Overheat Service call.

Power cut

Turn heater OFF,

then ON again.

This heater has the ability to check its own operation continuously. If a fault occurs, an Error Message will flash on

the Digital Display of the control panel. This assists with diagnosing the fault, and may enable you to overcome a

problem without a service call. Please quote the code displayed when inquiring about service.

If you see other codes displayed, contact Rinnai or your nearest service agent and arrange for a service

call.

In all cases, you may be able to clear the Error Message simply by turning

the heater OFF, then ON again. If the Error Message still remains or returns

on the next operation, contact RInnai or your nearest service agent and

arrange for a service call.

1 2 ... 22 23 24 25 26 27 28

No comments

Rinnai RCE-229A User Manual Page 27